12/31/2022 0 Comments Connect subwoofer to pioneer sc05![]() ![]() When Channel Level is selected while MCACC is set to OFF, the selection screen for the MCACC memory appears.Using the channel level settings, you can adjust the overall balance of your speaker system, an important factor when setting up a home theater system. You will return to the Manual SP Setup menu. OVER' and set the crossover frequency.3 Frequencies below this point will be sent to the subwoofer (or LARGE speakers).Ĥ When you're finished, press RETURN. Choose the PLUS setting if you want the subwoofer to output bass sound continuously or you want deeper bass (the bass frequencies that would normally come out the front and center speakers are also routed to the subwoofer).2 If you did not connect a subwoofer choose NO (the bass frequencies are output from other speakers).ģ Select 'X. SW - LFE signals and bass frequencies of channels set to SMALL are output from the subwoofer when YES is selected. ![]() ![]() If you didn't connect surround back speakers choose NO. Select SMALL to send bass frequencies to the other speakers or subwoofer. SB - Select the number of surround back speakers you have (one, two or none).1 Select LARGE if your surround back speakers reproduce bass frequencies effectively. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |